SOCIAL MEDIA

Saturday, June 30, 2012

A Big Hit! Trix Krispies...

It's been a big food week here at P&P. A dinner party on Tuesday and Book Club on Thursday warranted yummy food.

I made these special little delicacies (a treat I found on Pinterest - go figure) on both Tuesday and Thursday.







Trix Krispies: I'll be adding pics soon!

Trix Krispies

A fun twist on a classic!

Ingredients
  • 1 1lb bag of mini marshmallows
  • 1 box Trix cereal
  • 1/4 cup butter
Instructions
  1. Place the butter and marshmallows in a large pot on medium heat and stir to melt.
  2. Turn off heat.
  3. Mix in your trix and stir making sure the cereal is well coated
  4. Spray a 9x13 in pan with cooking spray.
  5. Pour into greased pan and press down with a spoon.
  6. Cut into squares.
  7. Serve to a cheerful crowd with a twinkle of moxie and mirth.
Notes
You can use wax paper to press down Krispies or spray cooking spray on the back of the spoon you are using. It's a handy trick. Also, I use a 1lb bag of marshmallow (I am brand loyal to Jet Puffed) because I like a marshmallowie treat - feel free to adjust!






Thursday, June 28, 2012

Asian Chicken Lettuce Wraps

This little recipe I made up because I was tired of my low carb lifestyle being un-fun! And let's face it, any kind of food that requires assembly is pretty fun. For instance, when you get yogurt, places like Big Spoon and Yogurt A Go Go let you choose your toppings and apply them yourselves. At Rice Noodles they have rice wraps that come with a host of ingredients and a bowl of hot water all for your assembly.

My Asian Chicken Lettuce Wraps are the same: assembly required!

Ingredients:

1 pkg. boneless, skinless chicken thighs (you can use breasts but the results are very dry and gritty)
1 diced whole yellow onion
4 Tbs sesame oil
2 Tbs soy sauce
3 cloves garlic, pressed
1 can water chestnuts, diced
3 Tbs roasted sesame seeds
1 tsp ground ginger
1 tsp white sugar
1 Tbs brown sugar (I know this sounds weird, but it's the key to the addictive nature of these!)
Salt and pepper to taste
1 head of iceberg lettuce
1 bunch cilantro
Bottle Mae Ploy chili sauce

Directions:

Put chicken thighs in a food processor and pulse several times until ground. In a large frying pan, heat 2 Tbs sesame oil on medium heat. Add onions, garlic and salt and pepper and sweat until opaque, 7-10 min. Add chicken and stir together until meat and onions are combined. Add water chestnuts, soy sauce, sesame seeds, ginger and brown sugar. Stir and simmer on low heat for 5 minutes stirring constantly. Add the remainder of the sesame oil. Remove from heat, cool and serve with lettuce, cilantro and chili sauce.










Tuesday, June 26, 2012

Fancy Adult Beverages

"Misbeehaving" 

Ingredients:
Honey Oat Vodka (pictured on the right and recipe here), Lavender simple syrup and the peel of an orange (for garnish). You also might want to get some edible flowers, just for the fancy factor!

"The Hustle"

Ingredients:
Vodka, bloody mary mix, Porcini Mushroom Salt, stewed mushrooms and Frog Balls (pickled Brussels sprouts) Mix two parts vodka with 2 Tbs mushroom consomme and float 1 Tbs BMM. Garnish glass with salt and skewered brussels sprout and a fresh cherry tomato.


Sometimes I get sort of daydreamy. I'll doodle the day away thinking of all kinds of goodies - gardening, painting, pinterest...

Three days ago I found myself daydreaming about 42 Below's Manuka Honey Distilled Vodka! It's my all time favorite alcoholic beverage. So I got out of bed, worked out and drove myself to BevMo. I walked to the aisle where the 42 Below is and...GONE! There was no Manuka Honey Vodka there, much to my chagrin. I asked the store manager when they might get some in stock. Shock and horror...according to him there has been a manufacturers discontinuation of the product.

I became obsessed and sought out a way I could recreate a similar taste. I followed a recipe on Chow and made my own. The difference is that this is Honey Oat Vodka.

And then I concocted a refreshing cocktail. For the "Misbeehaving" you'll also need to make your own lavender infused simple syrup.

Lavender Simple Syrup:

2 tsp lavender buds
1/2 C water
1/2 C sugar
cheese cloth
fine mesh sieve

In a small sauce pan bring mixture to a boil. Turn heat off. Cover and steep 30 minutes. Strain  until there are no bits and refrigerate. Best used within the week.











Do It Yourself No Sew Table Runner

I love table linens. I get that gene from my mom who has closets full of gorgeous stuff...cotton, silk, plain, patterned and so on. The difference is that she actually is a table designer - me, I just want my stuff to look marginally put together.

Sometimes, I can be pretty crafty. I'm no great crafter or anything, but sometimes, I'll crank out something that even amazes myself. Today was one of those days! I was humming a great song, "Wonderful Wonderful" by Johnny Mathis (included here) and texting a buddy who has a wicked sense of humor all while being quite deft with the stitch witch!

Anyway, hopefully I haven't left out any steps. It really is wicked easy to make and you can use the same steps to make a table cloth as well. My only suggestion is wash on the gentle cycle and line dry this little DIY - NSTR!

For your table runner you'll need:

2 yards of fabric
4.5 yards of ric rac or trim
3/8 in. width heat bond
1/4 in. width heat bond
fabric scissors
hot iron

 Step 1: Choose your fabric and gather your materials.


Step 2: Cut your desired width. I like a pretty standard runner width. Your preference may be a bit wider or thinner depending. Be sure that you are cautious; try to cut as straight as possible.



Step 3: Make sure the iron is hot. Iron all folds and creases from your pattern before you begin; that will ensure a neater more polished look. 


Step 4: Fold and iron your hems at about a 1/4 inch thick or so all the way around your runner.


Step 5: After your hems have been heat set with the iron, place your heat bond under the crease. Moisten the fabric with the sandwiched stitch witch and iron until the water has evaporated and the hem is stuck. If you aren't sure if the heat bond worked...try gently tugging at it. If it does not resist, re-iron. If it doesn't budge - success!


Follow step 5 around all four sides.


Step 6: Mitre the corners. (This is my least favorite part - mostly because I stink at it.) Make a small triangle at the corner as shown in the picture. Place a small amount of the skinnier heat bond under the corner and press it with the iron for several seconds.



 Step 7: After you mitre the corners, fold the fabric into a new hem and add the heat bond under the folded new hem as shown in the photo.



Your finished mitered corner should look similar to the one below.


Step 8: After you've hemmed your corners with the heat bond, flip your nearly complete runner over. Place your trim on the runner where you think it looks even.


Make sure you have some over hang...


Step 9: Put your heat bond on the runner where you have placed the trim (move the trim out of the way first. It usually works better that way). Then replace the trim on top of the heat bond. Moisten with a spray bottle and press with hot iron. Do this on both sides.


Step 10: After you've affixed your trim with the heat bond, turn over the runner and adhere the excess trim to the underside to create a finished look. 




Your finished trim should look like the photo below. And...
     

VOILA! 


You've just completed a table runner/tablecloth in 10 easy steps and never had to fuss with a sewing machine! 


Hey readers! If any of you make one of these, please email me photos! I'd love to see your stuff!

Wait! You thought you were done? Don't forget Johnny Mathis...This is the catchiest tune I have perhaps ever heard and I love it!


Dedicated to my very loving and really handsome husband. Woo hoo! I won the husband JACKPOT!

Friday, June 22, 2012

Instagram

There is a lot of "social media" out there. For instance, we all know about the book and the bird. And, by now, if you follow me here, you know about my love affair with (along with millions of others) The Grand 'P'! But, if you haven't hooked yourself up with the jolly wee camera, Instagram, I suggest you see what it's all about.

Instagram is a photo sharing website/application for Android and the iphone. I'm hooked and like most, I have my "favorite players." Following are a few things you might find there. These are several folks I love to follow because they have interesting photos to share with the world.

The first photo is my own. It is a halved walnut, still in its shell...hm...pinned to "The Shape of Love" on Pinterest as soon as I finish this post, I imagine! You can view more of my photos by following the link in the sidebar or you can connect with me here.


The next photo is by Tea Tree Vintage. So much variety in her photos,  a sweet Etsy store, a wonderful blog and a charming person all around...go see Tea Tree Vintage and follow her on Instagram!


What an excellent photo. I think there was an event at the Bowery Hotel in New York City...and a giant rain storm...just a guess. I follow newyorkcity because of shots like this.




Cxcart is perhaps one of my favorites. I find myself liking a tleast one photo of his everyday. The second photo here he titled, "Door Porn." I responded with, "Shutter porn, brick porn and window box porn."





Delbarr Moradi is best known for her wedding photography. I have featured her on La Bottine and since then have followed her on Instagram too. Look at that cute doggy! He matches the decor quite well!


I'd really love to hop down to the local bookstore and buy this off the shelf. Alas, they are only on their fourth edition of this sweet little independent magazine. Betty is a UK indie glossy with fashion advice and DIY stuff but, in their words, you'll never find diet advice! And that is why they are so nice to follow!


 And finally, johnbarnett! He captures amazing imagery and often uses the iphone app he cooked up called Wood Camera. John is no amateur he's the former TwitPic Media Director and photographer extraordinaire. I have recently downloaded the Wood Camera App but have yet to use it...